EMC testing is all about standards. Whether you are developing 5G products, automotive equipment, military equipment or something as simple as a common table lamp, your device must meet requirements set by standardization bodies such as IEC, CISPR, ISO, IEEE, CENELEC, ETSI, FCC, ANSI, RTCA or the MIL-STD committee. Click here to learn more.
The MPA-18G-26G5-50 from Maury Microwave is an Instrumentation Power Amplifier that operates from 18 to 26.5 GHz. It delivers a saturated output power of 50 W with a small signal gain of more than 51 dB and a gain adjustment of 15 dB. This amplifier is manufactured based on state-of-the-art GaN technology that exhibits high linearity for wideband communications testing purposes.
The THA-380M70G from NoiseKen is a TEM Horn Antenna that operates from 380 MHz to 7.125 GHz. It can handle an input power of up to 100 W and has a VSWR of less than 3:1. This antenna is suitable for performing near-field immunity tests of telecom equipment and various wireless transmitters.
The 10 m Test Range Semi-Anechoic Chamber from TDK Corporation has a frequency range from 30 MHz to 40 GHz (EMI) and 26 MHz to 19 GHz (EMS). It has been designed to perform radiated emission and immunity measurements of RF signals over a distance of up to 10 m. This chamber is fully compliant with ANSI C63.4, EN 50147-2, and CISPR 22 standards.
The FN2500 from Schaffner is a Single-Phase EMC/EMI Filter that is designed for applications in data centers, robotics and audio/video equipment. It meets the requirements of international standards, such as IEC/EN 62040-1 for uninterruptible power systems (UPS), IEC 62368-1 for audio/video, information, and communication technology equipment and IEC/EN 60335-1 for household and similar appliances.
The VC-06 from TDK RF Solutions is a high-definition (HD) Color Video Camera in an RF-shielded CCTV. It is designed for remote monitoring of equipment during EMC resting in a shielded room or anechoic chamber. This HD video camera has an optical zoom of up to 30x optical zoom and is ideal for use in various anechoic chambers and shielded rooms. It has a resolution of 1920 x 1080 pixels (at 60 FPS) with a low-light sensitivity of 0.5 lux without ICR (night vision) and 0.095 with ICR.
The Large Diameter Solder-in EMC/EMI Filter from Spectrum Control provides EMI filtering from 500 kHz to 10 GHz. These filters are ideal for low to medium impedance circuits where large amounts of capacitance to ground can be tolerated (feed-thru “C” circuit). They have a rugged, high-temperature monolithic discoidal capacitor construction that can withstand installation temperature of up to 300°C.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.