The AMP2065B-LC from Exodus Advanced Communications is a CW/Pulsed Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers a saturated output power of more than 300 W with 55 dB of gain and a gain flatness of 5 dB p-p. This Class A/AB linear amplifier has spurious levels of less than -60 dBc, harmonics of -20 dBc, and a 2-tone intermodulation of - 30 dBc.
The Rubidium MG362x1A from Anritsu are RF/Microwave Signal Generators that operate from 9 kHz to 20/43.5/70 GHz. They offer atomic clock frequency stability with an internal rubidium frequency reference option and are ideal for Metrology and high-speed clock applications. These generators deliver output power up to +20 dBm with an SSB phase noise of -136 dBc/Hz and have a frequency resolution of 0.001 Hz.
The PowerLOG 50700 from Aaronia is a Double-ridged Horn Antenna with a wide frequency range from 5 to 70 GHz. It delivers a gain of up to 25 dBi and can handle peak power of up to 500 watts. The high gain compensates for any cable loss that arises at higher frequencies. It measures 32 x 34 x 50 mm with a 1.85 mm (V-type) female connector.
The TBCG3-CN from Tekbox Digital Solutions is a Comb Generator designed for verification of conducted emission test setups. This comb generator has a specified bandwidth of 1.5 GHz and is a useful tool to validate the correct operation of the LISN, correct set-up, and correct configuration of the spectrum analyzer.
Enhance your connectors with the EESeal® — eliminate EMI/RFI issues and ensure EMC compliance from 100kHz–100GHz. Quell offers a range of SMD components to meet requirements and MIL specs for superior performance and reliability. Click here to learn more.
The KEMZ 801B from Ametek CTS is an absorbing clamp that operates from 10 kHz to 1000 MHz. It has a max. input level of up to 100 W and a connecting factor of +/- 4 dB. Its main function is to inject a known level of RF signal into the cable of the EUT at each test frequency and to determine a possible susceptibility of the EUT.
The SMT Hi-Rel Space EMI Filters from Spectrum Control are designed to facilitate military and space applications. They implement MIL-PRF-28861 design considerations with extended thermal shock and voltage conditioning. These board-mount EMI filters have a feedthrough current rating of 15 A and a Pi current rating of 10 A.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.