The EH022 from Microwave Vision Group is a Dual-Ridge Horn Antenna that operates from 200 MHz to 2 GHz. This antenna provides a realized gain from 6 to 14 dBi with an average VSWR of 1.5:1 and has an antenna factor from 7 to 28 dB/m. This linearly polarized antenna has an E-plane HPBW from 42 to 88 ° and an H-plane HPBW from 25 to 85°. It is suitable for radiated emissions testing and complies with standards such as ANSI 63.4, CISPR 16-2-3, 22, 32, MIL-STD 461.
The MDS 21 C from Schwarzbeck Mess - Elektronik is an Absorbing Clamp for frequency range from 30 to 1000 MHz. It is designed for disturbance power measurements adhering to the CISPR-16-2-2 and CISPR-16-1-3 standards. This absorbing clamp has four crucial functional components – RF-current transformer, absorber chain, sheath wave suppressors and plastic housing.
The CWS 500N3 from AMETEK CTS is an Immunity Test Simulator for ripple noise and magnetic fields from 10 Hz to 250 KHz. It is designed for the automotive, aerospace, and military applications and satisfies requirements of SAE J1113-2, ISO 11452-8, DO 160D/E Section 18, MIL-STD-461 D/E/F/G CS101, CS109 and RS101. This simulator has built-in LF signal generator, LF amplifier, LF transformer 2:1, frequency-selective voltage and current meter and load resistors.
The Dual Line EMI Filter from Spectrum Control is a Dual Line Common Mode Panel Mount Filter. It provides an EMI filtering of common mode noise from 30 kHz to 1 GHz and differential mode noise filtering from 30 kHz to 10 MHz. This filter employs a common mode choke, line to ground and line to line capacitance to enable attenuation of common and differential mode voltages (noise) from both lines on inputs and outputs of AC or DC systems.
The AA-618G-300-GT from Advanced Amplifiers is TWT Amplifier that operates from 6 to 18 GHz. It delivers an output power of more than 250 W (54 dBm) with a gain of 54 dB. This amplifier generates output power with a pulse width from 0.1 µs to CW with a rise/fall time of less than 15 ns and a pulse jitter of ±2 ns. It has spurious emissions of -60 dBc (250 MHz and above) and has a gain stability of 0.25 dB/24 hours. The amplifier is equipped with built-in protection circuits and has extensive internal monitoring.
The CAC-S™ from TDK RF Solutions is a Fully Anechoic Chamber for frequency range from 26 MHz to 18 GHz. It is mainly designed for radiated EMC measurements within the range of 3 m and complies with standards such as EN 50147-2, ANSI C 63.4, CISPR 22, and IEC 61000-4-3. It utilizes a distinctive EMC absorber installation method and consists of ferrite tiles mounted onto dielectric panels.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.