EMC Directory recently interviewed Parminder Singh who is Vice President of the EMC Department at QAI Laboratories. QAI is a leading provider of testing, inspection, and certification services. He has over 30 years of experience in the EMC industry, specializing in electromagnetic compatibility, military, avionics, automotive, and wireless testing. Click here to read the full interview
The LBX 7000 from LabiFix Innovations is a shielded test enclosure that operates from 1 to 6 GHz. It is designed for EMI/RFI testing of wireless devices, small computers, laptops, etc. This isolation box carries out its various tests in compartments. It has an RF Fitted Gasket System and is equipped with EMI filters on Data Ports. It is well suited for pre-compliance tests and over-the-air measurements.
The PowerLOG® PRO 30300 EMI from Aaronia AG is an EMC Antenna that operates from 300 MHz to 3 GHz. It provides a gain of up to 12 dBi has a VSWR of less than 2.5:1 and ensures a constant field strength, regardless of the frequency. The broadband antenna is capable of accommodating both horizontal and vertical polarization (H+V), offering adaptability for signal measurement and transmission in various orientations.
The DMC-CISPR 25 from Diamond Microwave Chambers is a Shielded, Semi-Anechoic Chamber (SAC) with a frequency range from 30 MHz to 40 GHz. It is engineered for CISPR 25 and ISO 11452-2 measurements of automotive components with maximum dimension up to 1-meter. This SAC is full compliance emission per ANSI C63.4 and CISPR-16 and full compliant immunity per IEC/EN 61000-4-3 standard.
The ANK-910L from Com-Power Corporation is an EMC Antenna Kit that operates from 9 kHz to 1 GHz. It includes the necessary antennas, preamplifier and measurement cables for pre-compliance or qualification level radiated emissions testing as well as a comb generator for test site verifications and a near-field probe set for troubleshooting EMI problems.
The Filtered D-Sub Connectors from Spectrum Control are specialized connectors designed for military combat, defense, and warfare applications. They come with shell sizes from 9 to 50 and termination options including PC mount, wire wrap, solder cup, and 90° PCB. These filters have a Pi configuration which provides strong protection against interference with a steep 45-60 dB per decade slope in the insertion loss curve.
The MIG1809-1P from EMC Partner is a surge generator designed for conducted immunity testing. It complies with IEC 61643-1 standards and ensures safety with features like a safety circuit and a connector for warning lamps, following VDE 0104 guidelines. This hybrid surge generator delivers a voltage surge of 18 kV with a voltage wave shape of 1,2/50 µs at "no load" and a current of 9kA with a wave shape of 8/20 µs at short circuit.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.