The AA-2100M-2000 from Advanced Amplifiers is a Solid-State Power Amplifier (SSPA) that operates from 2 to 100 MHz. It delivers a CW saturated power output of 2000W with a power gain of more than 63 dB. This Class AB amplifier is suitable for all single channel modulation standards and features input power protection (up to +8 dBm) and load VSWR protection. It has harmonic levels of -20 dBc and spurious emissions of -60 dBc.
The Dual Line EMI Filter from Spectrum Control is a Dual Line Common Mode Panel Mount Filter. It provides an EMI filtering of common mode noise from 30 kHz to 1 GHz and differential mode noise filtering from 30 kHz to 10 MHz. This filter employs a common mode choke, line to ground and line to line capacitance to enable attenuation of common and differential mode voltages (noise) from both lines on inputs and outputs of AC or DC systems.
The EMC-MC from Microwave Vision Group is a Fully Anechoic Chamber that is suitable for pre-compliance emissions and immunity testing. It has designed for frequency range from 26 MHz to 18 GHz (40 GHz option available), has a 3-meter test range and offers repeatable test results in the range of 1 to 1.2 m.
The DRH110 from RFSpin is a Double Ridged Horn Antenna that operates from 14 to 110 GHz. It has an antenna factor from 44.3 to 53.7 dB/m and an average VSWR of 1.4:1. This linearly polarized antenna is manufactured with RF SPIN’s SPM technology to achieve excellent mechanical and radio parameters. It covers 5G frequency bands, making it a versatile choice for modern communication demands.
The PAM-0101 from A.H Systems is a Preamplifier designed to enhance system sensitivity across the frequency range from 10 MHz to 1 GHz. It provides a typical gain of 50 dB, has a noise figure of 2.7 dB and a VSWR of 1.5:1 (output). This individually calibrated preamplifier has a low VSWR and high gain making it suitable for various testing requirements.
The FPS-01 from TDK RF Solutions is a Field Probe Stand designed for use in anechoic chambers and shielded test rooms to meet IEC-803-3 compliance. It allows for the precise positioning of sensors at heights of either 1.5 m or 80 cm. The stand, constructed from durable, non-conductive commercial-grade fiberglass and plastic, ensures that RF test measurements remain unaffected.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.