The AMP2145D-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/Pulsed saturated output power of 60 - 80 W with a power gain of more than 49 dB. This amplifier has a 2-tone intermodulation (IMD) of -30 dBc, harmonics of -20 dBc, and spurious emission of -60 dBc. It has a Class A/AB linear design and built-in protection circuits with a forward RF sample port and remote-controlled platforms.
The R&S®ESL6 from Rohde & Schwarz is an EMI Test Receiver that operates from 9 kHz to 6 GHz. It combines two instruments in one, measuring EMC disturbances in accordance with the relevant standards and also serving as a full-featured spectrum analyzer. It has an amplitude accuracy of ±0.5 dB and a displayed average noise level of -140 dBm.
The NNLK 8128 from Schwarzbeck Mess - Elektronik is a V-Line Impedance Stabilization Network (LISN) with a frequency range from 9 kHz to 30 MHz. It has a 50 µH/50-ohm AMN impedance and can handle a maximum continuous current of 4x32 A. The device under test has to be connected to the wing terminals at the front panel.
The ESD3000 by EMC Partner is an ESD Generator with a fully portable construction with no additional basic unit requirement. It includes an LCD control panel with 6 menu buttons,1 trigger button, and a holding time of more than 5 s. The generator supports a maximum voltage of 16 kV or 30 kV, depending on the chosen modules, with voltage steps of 100 V for testing.
EMC Directory recently interviewed Rick Wesselink who is Commercial Manager, Wireless & EMC, at Kiwa Netherland B.V. Kiwa is a leading provider of testing, inspection, and certification services. KIWA specializes in EMC testing, ensuring products meet electromagnetic compatibility requirements. Click here to read the full interview.
The LRET-10K30M-1 by Lorentz EM Technology Co., Ltd is an E-Field Generator with a capability to withstand EM waves within the frequency range of 10 kHz to 30 MHz. It has a VSWR up to 3.0 and requires a power supply of 2000 W. This equipment tests the radiation sensitivity of the electric field in the electromagnetic compatibility test as a transmitting antenna.
The MF 300 by EMIS is an EMC / EMI Filter with an operating frequency of 50/60 Hz. It has a current rating of 1 - 16 A and a max. continuous operating voltage of 250 VAC. This filter with IEC Inlet is designed to suppress undesirable electrical disturbances in Power Lines. It limits the amplitude of interfering voltages on AC power lines and prevents them from propagating into or out of the filtered equipment.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.