Latest News & White Papers this Week

13 Aug, 2024 Newsletter - EMC Directory

Top stories this week. View it in your browser


Weekly Edition
Date: 13 Aug, 2024

Get EMC Testing Quotes

Featured Products this Week

Dual FFT-based Modal EMI Receiver for Conducted Emissions

EMI Receiver from EMZER Technological Solutions

The EMSCOPE RX4 from EMZER Technological Solutions is a Dual FFT-based Modal EMI Receiver that operates from 150 kHz to 30 MHz.This receiver combines two simultaneous EMI Receivers, each equipped with peak, quasi-peak, and average detectors, and also, includes two transient limiters. This dual-channel configuration receiver allows parallel and real-time operation.

Download Datasheet Product Details

8 kW, GaN Pulsed Solid State Power Amplifier from 1 to 2.5 GHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP2074P-LC-8KW from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 1.0 to 2.5 GHz. It delivers a pulsed output power of 8 kW (width up to 100 µs, maximum duty cycle of 6%) with a power gain of more than 69 dB. This class A/AB linear amplifier utilizes GaN technology and features built-in protection circuits with extensive monitoring.

Download Datasheet Product Details

USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 8 GHz

Spectrum Analyzer from Aaronia AG

The SPECTRAN V6 ECO 200XA-6 from Aaronia AG is a Compact Real-Time Spectrum Analyzer that operates from 9 kHz to 6 GHz (up to 8 GHz optional extension for Wi-Fi 6E support). It incorporates a vector signal generator, has a real-time bandwidth of 44 MHz (Tx) and 88 MHz (2 x 44 MHz, via USB), and a resolution bandwidth from 62 MHz to 200 MHz.

Download Datasheet Product Details

100 W Power Amplifier from 0.7 to 6 GHz for Immunity Testing

EMC Power Amplifiers from Laplace Instruments

The RF1660 from Laplace Instruments is an EMC Power Amplifier for Immunity Testing that operates from 0.7 to 6 GHz. It delivers a saturated output power of 60 W with a small signal gain of more than 53 dB and supports CW/AM/FM/PM/Pulse input signal formats. This amplifier utilizes Class A linear power devices that provide an excellent 3rd order intercept point, high gain, and a wide dynamic range.

Download Datasheet Product Details

Electric Field Probe from 10 MHz to 26 GHz for Isotropic Measurements

Near Field Probe from Raditeq

The RadiSense® RSS2026S from Raditeq is a High-Frequency E-field probe that operates from 10 MHz to 26 GHz. This probe provides an isotropic E-field measurement from 1 to 1000 V/m, a damage level of up to 2000 V/m, and a measurement resolution of 0.1 V/m (from 100-1000 V/m). It can conduct measurements at a speed of 100 measurements/second and offers the most accurate frequency response and accuracy.

Download Datasheet Product Details

Featured Interview

Jennifer Harkless - Product Line Manager

Interview with Jennifer Harkless from Spectrum Control

EMC Directory recently interviewed Jennifer Harkless who is Product Line Manager at Spectrum Control. Spectrum Control (formerly APITech) is a world leader in technologies, components, and subsystems to manage and control the electromagnetic spectrum. Jennifer is an experienced Operational Excellence Manager with a demonstrated history of working in the consumer goods industry. Click here to read the full interview.

EMC Pre-Amplifier from 10 MHz to 8 GHz

EMC Pre-Amplifier from Schwarzbeck Mess - Elektronik OHG

The BBV 9748 from Schwarzbeck Mess - Elektronik is an EMC Pre-amplifier operating from 10 MHz to 8 GHz. It has a gain of 29 dB and an amplitude flatness up to +/- 3 dB. It has a low noise figure of less than 2.7 dB which makes the system noise nearly independent of the other components including cable and receiver.

Download Datasheet Product Details

RF Shielded Test Enclosure from 1 to 6 GHz

Shielded Test Enclosure from Liveon Technolabs

The LTL Q30001 from Liveon Technolabs is a Shielded Test Enclosure for RF/EMC testing. It features high-performance RF absorber lining with user-defined & interchangeable I/O connector panels. This shielded test enclosure provides excellent RF isolation and waveguide for fiber insertion. It has shielded AC/DC power filters, EMI filters on data ports, and dual ventilation for cooling.

Newsletters

Signup for Weekly Updates

Other Newsletters

Latest News & White Papers this Week