Latest News & White Papers this Week

13 Feb, 2024 Newsletter - EMC Directory

Top stories this week. View it in your browser


Weekly Edition
Date: 13 Feb, 2024

FREE eBook - Download Now!!

Featured Products this Week

35 W, Rackmount GaN Power Amplifier from 1 to 4 GHz

EMC Power Amplifiers from Exodus Advanced Communications

The AMP1015-1 from Exodus Advanced Communication is a Solid-State Power Amplifier (SSPA) that operates from 1000 to 4000 MHz. It delivers an output power of more than 35 W with a power gain of 46 dB. This SSPA employs a class AB linear GaN design and is suitable for all single-channel modulation standards. It provides high reliability and ruggedness with in-built protection circuits. The SSPA requires a DC voltage from 28 to 30 V and consumes less than 6 A of current.

Download Datasheet Product Details

Rugged, High-Reliability MIL-STD-461 Modular Power EMC/EMI Filters

EMC / EMI Filter from Spectrum Control

The MIL-STD-461 Modular Power Filters from Spectrum Control are designed for high performance and reliability in applications where SWaP-C are critical considerations. They have a modular filter lineup ensuring high-frequency attenuation up to an impressive 1 GHz in common mode and deliver superior EMI filtering performance. These configurable filters provide excellent flexibility, addressing diverse EMI filtering needs. They feature a well-designed input interface for seamless integration into existing systems.

Download Datasheet Product Details

43.5 GHz Real-time Spectrum Analyzer

Spectrum Analyzer from Signal Hound

The SM435C from Signal Hound is a Real-time Spectrum Analyzer that operates from 100 kHz to 43.5 GHz. It has a dynamic range of 110 dB, a sweep speed of 1 THz/sec at 30kHz RBW (using Nuttall windowing), and an SSB phase noise of -138 dBc/Hz@100 kHz offset. This RTSA is designed for remotely-located accurate RF data analysis at the lowest cost possible and includes a 10 Gigabit Ethernet SFP+ port, enabling it to communicate with a PC over long distances using a fiber optic cable.

Download Datasheet Product Details

EM Clamp for Conducted Immunity Testing from 150 kHz to 230 MHz

Absorbing Clamp from Com-Power Corporation

The CLEM-6146 from Com-Power is an Electromagnetic Clamp designed for use as a clamp injection device for conducted immunity tests. It has a frequency range of 150 kHz to 230 MHz which can be extended from 10 kHz to 1 GHz. This EM clamp or a Bulk Current Injection Probe (BCIP) can be used for IEC/EN 61000-4-6 tests on ports/cables for which no coupling/decoupling network (CDN) is available. This 50-ohm EM clamp can handle an input power of up to 100 W and and weighs 5.9 Kg.

Download Datasheet Product Details

Free eBook - Download Now!

EMC Pre-Compliance Handbook

everything RF in cooperation with EMC Directory has published this “EMC Pre-Compliance Handbook” to act as a comprehensive resource for anyone looking to learn about EMC Pre-Compliance testing. This eBook discusses a wide range of topics including pre-compliance testing, tests performed in EMC Pre-compliance testing, considerations in pre-compliance testing, and the instruments and accessories used in pre-compliance testing. Click Here to Download Now!

Open TEM Cell for EMC Pre-compliance Testing

TEM / GTEM Cell from TEKBOX Digital Solutions

The TBTC2 from TEKBOX Digital Solutions is an Open TEM/GTEM Cell designed for radiated emissions and immunity testing of electronic devices. Combined with a spectrum analyzer, products can be tested before and after EMC-related design modifications. It has a nominal cell impedance of 50 ohms and a wave impedance of 377 ohms. This open TEM cell can handle an input power of up to 25 W, has a transmission loss of 3 dB (up to 1.15 GHz) and a VSWR of less than 1.2:1.

Download Datasheet Product Details

Versatile EMI Receiver for Emission Testing 9 kHz to 40 GHz

EMI Receiver from GAUSS INSTRUMENTS

The TDEMI® X40 from GAUSS INSTRUMENTS is an EMI Receiver with a frequency range from 9 kHz to 40 GHz. It uses leading-edge analog-to-digital converters with an excellent ratio of signal-to-noise power density, modern high-speed FPGAs, and in-house designed high-performance microwave circuits to achieve high measurement accuracy and measurement speed. This receiver comes standard with a fully integrated spectrum analyzer mode and also a real-time spectrum analyzer mode.

Download Datasheet Product Details

New White Papers & Articles

Demystifying surge protection - Texas Instruments

Tackling the Issue of Non-Compliant Products with a new EMC Directive - Eurofins York

Building a Virtual Electromagnetic Test Environment for Aerospace and Automotive Platforms - EMA

More Whitepapers

FREE eBook - Download Now!!