EMC testing is all about standards. Whether you are developing 5G products, automotive equipment, military equipment or something as simple as a common table lamp, your device must meet requirements set by standardization bodies such as IEC, CISPR, ISO, IEEE, CENELEC, ETSI, FCC, ANSI, RTCA or the MIL-STD committee. Click here to learn more.
The ACS-250-100W from Com-Power Corporation is a Power Amplifier that operates from 0.15 to 250 MHz. It delivers an output power of 100 W with a gain of 50 dB. This amplifier is compatible with AM, FM, and pulsed input signals and is purpose-built for conducted immunity testing, adhering to all necessary technical specifications for IEC 61000-4-6 compliance testing.
TEKBOX The TBST-86/49/45/1-B from TEKBOX is a Shielded Tent that is designed to suppress interference from ambient noise in EMC pre-compliance measurements. It has two layers of conductive fabrics and is supported by rigid aluminum profiles that measure 20 x 20 mm. This shielded tent provides an ambient noise attenuation of more than 50 dB (from 4.5 to 6 GHz).
The LBX1400 from LabiFix Innovations is an RF Shielded Box that is designed for wireless device testing up to 12 GHz. It has a rugged welded construction with an interior dimension of 10 x 6.5 x 16 inches. This shielded box provides shielding effectiveness (isolation) of better than 80 dB against all forms of EMI/RFI and also has EMI filters on data ports and power lines.
EMC testing is all about standards. Whether you are developing 5G products, automotive equipment, military equipment or something as simple as a common table lamp, your device must meet requirements set by standardization bodies such as IEC, CISPR, ISO, IEEE, CENELEC, ETSI, FCC, ANSI, RTCA or the MIL-STD committee. Click here to learn more.
The HyperLOG 7025 from Aaronia AG is a Log Periodic Antenna that operates from 700 MHz to 2.5GHz. This directional antenna provides a gain of 4 dBi, has a VSWR of less than 2.0:1, and an antenna factor in the range of 23–34 dB/m. It is suitable for on-the-go measurements and direction-finding applications, as well as laboratory use. The antenna is highly compatible with spectrum analyzers, making it optimal for EMC measurements.
The Custom Circular EMI Filtered Connectors from Spectrum Control are specialized circular connectors with integrated EMI filters. They have planar-style filtered arrays and are fully intermateable with MIL-DTL-38999 Series III. The planar-style filtered arrays in C and Pi circuits can accommodate capacitance up to 200 nF in most configurations. These connectors have a large planar capacitance pin-to-pin ratio, providing power and signal filtering in a single package.
The FFT 3010 from AFJ INSTRUMENTS is an EMI Test Receiver that operates from 9 kHz to 300 MHz. It is designed for accurately measuring conducted electromagnetic interference and conforms to the CISPR 16 international standard. This receiver utilizes the FFT scan mode which enables fast and efficient measurements of conducted electromagnetic interference in compliance with EMI international, European, and product standards.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.