The ICS 105 set from Langer EMV-Technik is a Near-Probe Scanner 4-axis Positioning System for measurements of high frequency near fields above ICs. This IC scanner can measure with a measuring resolution of 50 to 100 µm depending on the ICR near-field microprobe's magnetic and electric fields. It requires a 110/230 V supply and supports a USB interface.
The SLPP0230 from RFSpin is a Log-Periodic Dipole Antenna that operates from 200 MHz to 3 GHz. This linearly polarized antenna, for transmitting and receiving applications, has an antenna factor from 10 to 30 dB/m and a gain improvement of 2.5 dB. It has a wide bandwidth, low return loss, and individual calibration.
The MT50 from Dutch Microwave Absorber Solutions (DMAS) is a Closed-Cell Carbon-Loaded Polystyrene Absorber that operates from 80 MHz to 40 GHz. It is based on a unique Pyramidal design using baseplates and tapers that provide rigidity and superior tensile strength ensuring no drooping of absorber tips.
The AMP2145D-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a saturated output power of 60 - 80 W with a power gain of more than 49 dB. This amplifier has a 2-tone intermodulation (IMD) of -30 dBc, harmonics of -20 dBc, and spurious emission of -60 dBc.
Lot catalog includes equipment from top manufacturers such as Keysight, Tektronix, Litepoint, National Instruments, Electroglas, Agilent, Lecroy and more. Click here to learn more.
The EMZ10-200M by EMZER is a Transient Limiter designed for protecting the input circuit of spectrum analyzers and measurement receivers. It operates at a frequency range of 9 kHz to 200 MHz with an insertion loss of 10 dB. This transient limiter can handle a max. input power of 5W / 37 dBm (at 25 deg C) and 20 dBm (without compression).
The 8700i from Pearson Electronics is a Bulk Current Injection Probe designed as per MIL-STD-461 CS114, CS115, and CS116. It operates at a frequency range of 10 kHz to 400 MHz and can handle a max input power of 100 W for 60 min. The probe has a hole diameter of 2 inches (50.8 mm). This BCI probe weighs 2.7 kg and measures 147 x 127 x 41 mm (W x H x T).
The HyperLOG® 20300 EMI from Aaronia AG is an EMC/EMI Pre-Compliance Antenna that operates from 20 MHz to 3 GHz. It combines the capabilities of a biconical as well as a log-periodic antenna to minimize measurement error rates. This antenna provides a gain of 8 dBi and has a VSWR of less than 2:1. This antenna has 297 calibration points (10 MHz steps) with an accuracy of 0.3 dB and can be used as a broadcasting antenna for up to 310 W (AM).
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.