The WE-EMIP EMI Patch from Würth Elektronik is a Stick on EMI Absorber patch operating from 100 Hz to 25 GHz. It has a complex permeability of 100 µ' @ 1 MHz and a surface resistivity of 0.002 Ohm/ square. This Halogen-free patch has a peel adhesion over steel of about 4 N/ cm and is RoHS and REACH-approved.
The AMP2145C-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/Pulsed output power of 50 W with a minimum gain of 47 dB. This Class A/AB power amplifier has spurious levels of less than -60 dBc and harmonics of -20 dBc. It is equipped with built-in protection circuits and incorporates high-power advanced technology with high efficiency and high-reliability.
The ICR HV100-6 from Langer EMV-Technik is a near-field microprobe that operates from 2.5 MHz to 6 GHz. It has a resolution of 60 µm and an internal diameter of 100 µm. The probe is designed for a high-resolution measurement of magnetic near fields. The ICR HV100-6 probe set can perform a Surface Scan via IC according to IEC 61967-3, a Volume scan via IC, and a Pin Scan.
The DB8.018G6363AC from Elite RF is a Solid-State Power Amplifier that operates from 8 to 18 GHz. It delivers a minimum output power of 2000 W with a gain of 63 dB. It has a pulse width of 500ns-500us and a duty cycle of 10%. This class AB solid state amplifier has a rise/fall time of 100 ns, a spurious of 60 dBc, and a harmonics of 20 dBc.
EMC pre-compliance testing is a proactive approach that seeks to identify potential issues during the electronic design process, long before full-scale testing occurs. This incremental, stage-by-stage approach provides a comprehensive picture of the product and its EMC-related design flaws, allowing for timely adjustments to avoid inconvenient and costly product redesigns that can occur when testing is put off until the final phase of the design plan. Click here to learn more.
The DLPP-6 from RFSpin is a Log-Periodic Antenna that operates from 500 MHz to 6 GHz. This dual linearly polarized antenna has an antenna factor from 19 to 40 dB/m and a VSWR of 2.5:1.7. It has a wide bandwidth, low return loss, and individual calibration. This antenna is available in high-grade aluminium alloy water-resistant housing.
The MPA-6G-18G-50 from Maury Microwave is a GaN Power Amplifier (PA) that operates from 6 to 18 GHz. It delivers a saturated output power of more than 50 W with a small signal gain of over 50 dB. It has a gain adjustment range of 20 dB. This amplifier is manufactured using a state-of-the-art GaN process and includes temperature, input power, and module protection circuitry for safety.
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.