1. Home
  2. NewsLetters
more
PREV 25 June, 2024 NEXT

Latest News & White Papers this Week

25 June, 2024 Newsletter - EMC Directory

Top stories this week. View it in your browser

 
Weekly Edition
Date: 25 June, 2024
 
Sponsored by Aaronia AG
 
 
Featured Products this Week
EMC Antenna
EMC/EMI Pre-compliance Test Antenna from 20 MHz to 3 GHz
EMC Antenna  from Aaronia AG
The HyperLOG® 20300 EMI from Aaronia AG is an EMC/EMI Pre-Compliance Antenna that operates from 20 MHz to 3 GHz. It combines the capabilities of a biconical as well as a log-periodic antenna to minimize measurement error rates. This antenna provides a gain of 8 dBi and has a VSWR of less than 2:1. This antenna has 297 calibration points (10 MHz steps) with an accuracy of 0.3 dB and can be used as a broadcasting antenna for up to 310 W (AM).
Download Datasheet Product Details
EMC Power Amplifiers
150 W Benchtop/Rackmount GaN Power Amplifier from 1 to 6 GHz
EMC Power Amplifiers  from Exodus Advanced Communications
The AMP2070A from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers a saturated output power of more than 150 W and provides a gain of better than 50 dB. This amplifier has a class AB linear GaN design and is suitable for all modulation standards. It ensures high reliability and ruggedness with built-in protection circuits and has options for monitoring forward/reflected power, VSWR, voltage, current and temperature sensing.
Download Datasheet Product Details
EMI Receiver
9 kHz to 6 GHz EMI Receiver for Emission Testing
EMI Receiver  from GAUSS INSTRUMENTS
The TDEMI ULTRA 6 from GAUSS INSTRUMENTS is an EMI Receiver with a frequency range from 9 kHz to 6 GHz. It provides a fully integrated spectrum analyzer and a real-time spectrum analyzer with a real-time analysis bandwidth of 685 MHz. This receiver utilizes GAUSS INSTRUMENTS' patented technology with advanced DSP concept in combination and includes ultrafast receiver scanning.
Download Datasheet Product Details
Current Probe
Current Probe for EMC Applications from 20 Hz to 20 MHz
Current Probe  from A.H. Systems
The BCP-610 from A.H. Systems is a Current Probe that measures RF and EMP currents and operates from 20 Hz to 20 MHz. It can measure the conducted current without making direct contact with the source conductor or metallic surface using clamp-on current probes. This current probe is designed to permit field intensity meters, spectrum analyzers, and other 50-ohm impedance instruments to measure quantitative magnitudes of current.
Download Datasheet Product Details
Sponsored by Aaronia AG
SPECTRAN® V6 ECO
The new SPECTRAN® V6 ECO
A powerful yet modular platform in a compact and flexible form factor. It covers the entire EMC-relevant frequency range and, with ultra-fast sweep speed and multiple limits simultaneously, allows the fastest pre compliance measurement ever. Click here to learn more.
Antenna Positioners
Antenna Positioner with 50 Kg Load Capacity
Antenna Positioners  from SMITEK
The PS-EL-AZ-20 form SMITEK is an antenna positioner with a maximum vertical load of 50 kg. It has a maximum stabilizing torque in elevation of 200 Nm and a nominal speed of 10 rpm. This azimuth-elevation positioner has a travel range in azimuth of 0 to 360 degrees and a travel range in elevation of -90 to 90 degrees. It has a maximum tilting torque of 25 kgm and a driver input power of 1.8 kW.
Download Datasheet Product Details
Shielded Test Enclosure
Shielded Test Enclosure from 20 MHz to 6 GHz
Shielded Test Enclosure  from RF Electronics
The HDRF-20U60-A1 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz.  It has a thick RF-absorbing foam that provides an isolation of over 95 dB. The device has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals. The absorbers deaden standing waves and reflections with a reflection loss of -25 dB at 2.4 GHz and higher frequencies.
Download Datasheet Product Details
EMC Power Amplifiers
900 VA, DC-enabled Linear Power Amplifier
EMC Power Amplifiers  from AE Techron
The 7224 from AE Techron is an EMC Power Amplifier with a frequency response of DC — 300 kHz. It has a slew rate of 90 V/µSec and a signal-to-noise ratio of -113 dB to -99.9 dB. The amplifier is designed for stand-alone or rack-mounted operation. The Chassis is steel with a black powder coat finish and occupies two EIA 19-inch-wide units. It uses BNC, DB9 and DB25 connectors for signal input, interconnect and interlock respectively.
Download Datasheet Product Details
New White Papers & Articles
Solutions for touchscreen applications with high EMC requirements - SCHURTER (S) Pte. Ltd.
5G Millimeter Wave Devices: The Impact on EMC Compliance Tests - ETS-Lindgren
Testing Preparation Success for MIL-STD-461 & RTCA-DO-160 - Quell Corporation
Protecting sensitive electronics power circuits from EMI; designing for performance and size - Spectrum Control
More Whitepapers
Sponsored by Aaronia AG
 
 
Latest News this Week
NTS Technical Systems Rebrands as Element U.S. Space & Defense - NTS
TÜV Rheinland Inaugurates Its State-of-the-art Technology and Innovation Center in Boxborough, MA - TÜV Rheinland AG
Anritsu and Y.I.C Technologies Partners on Innovative EMC Tools - Anritsu
Element Opens New Connected Technologies Laboratory in Surrey, Guildford - Element Materials Technology
Keystone Compliance Assists Medical Device Manufacturers in Meeting Regulatory Standards - Keystone Compliance
More News
Upcoming Event
Event Image
EMC + SIPI 2024
Date: 5 to 10 Aug, 2024
Location: Phoenix, Arizona
More Events
About EMC Directory
EMC Directory is the largest directory of EMC / EMI Testing companies and Equipment manufacturers on the Internet. We have listed the leading EMC / EMI Companies from around the world and made them searchable by their location and capabilities.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]
newsletter