Green Mountain Providing Proven EMC Testing to Military Standards

Green Mountain Providing Proven EMC Testing to Military Standards 712370

Green Mountain Electromagnetics is an EMC and Radio test laboratory. For 25 years, GME has been offering electronic-product manufacturers compliance testing to military standards. GME offers quality testing alongside personalized service, creating positive long-term relationships with clients.

Military EMC Testing Lab with 25 Years of Experience

The following methods are examples of some of the more common tests performed on military equipment:

Department of Defense Interface Standard MIL-STD-461G, “Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (10 December 2015).” Operation and evaluation of the equipment under test were per manufacturer instructions.
MIL-STD-F EMC TESTING
- Low-frequency conducted emission measurement equipment and procedures were in accordance with MIL-STD-461F, Method CE101. The limit is per figure CE101-2 from 60 Hz to 10 kHz.
- High-frequency conducted emission measurement equipment and procedures were in accordance with MIL-STD-461F, Method CE102. The limit is per figure CE102-1 from 10 kHz to 10 MHz.
- Low-frequency radiated emission measurement equipment and procedures were in accordance with MIL-STD-461F, Method RE101. The limit is per figure RE101-2 from 30 Hz to 100 kHz.
- High-frequency radiated emission measurement equipment and procedures were in accordance with MIL-STD-461F, Method RE102. The limit is per figure RE102-2 from 10 kHz to 18 GHz for internal to the pressure hull.
- Low-frequency conducted susceptibility measurement equipment and procedures were in accordance with MIL-STD-461F, Method CS101. Applied levels are per figure CS101-1 from 30 Hz (120 Hz for AC units) to 150 kHz for > 28V.
- Transient conducted susceptibility measurement equipment and procedures were in accordance with MIL-STD-461F, Method CS106. Applied levels are per figure CS106-1.
- High-frequency conducted susceptibility measurement equipment and procedures were in accordance with MIL-STD-461F, method CS114. Applied levels are per table VI from 4 kHz to 200 MHz for submarines internal.
- High-frequency radiated susceptibility measurement equipment and procedures were in accordance with MIL-STD-461F, method RS103. Applied levels are per table VII from 2 MHz to 18 GHz for submarines internal.